Get Ready for Drone Remote ID

Posted by on 8/4/2023 to News

The FAA's final rule on Remote ID goes into effect on September 16th, 2023. From this date forward, all drones must broadcast their identification and location information while in flight. The broadcast information gives the FAA, law enforcement, and federal agencies the ability to locate a drone and its control station when a drone appears to be flying in an unsafe manner or where it is not allowed to fly. In addition, this information lays the foundation for more complex drone use such as beyond line of site operations.

How to Calibrate the DJI P1 Lens

Posted by on 5/12/2023 to How To's

The DJI P1 is a full-frame sensor camera with interchangeable lenses that produces incredible 2D and 3D models with survey grade accuracy. But in order to get the accuracy you need, you will have to perform a lens calibration when you first get the camera, or any time you swap lenses. The purpose of the calibration is to find the exact center of the exit pupil of the lens. This is the point used for the GPS position data written to each image. Without the calibration, your data can be slightly shifted.

DJI Mavic 3 Thermal vs DJI Mavic 2 Enterprise Advanced - What's New?

Posted by on 10/21/2022 to Comparisons

Next, the Mavic 3 Thermal uses the new DJI RC Pro controller. The ports on the controller have been moved to the bottom, and the antennas can now move independently of each other, but the real differences are seen in the software. The RC Pro uses DJI's new Ocusync 3.0 which greatly improves the image transmission. It also uses the newer Pilot 2 app that the Matrice 300 RTK and Matrice 30 series use. In flight you'll notice a huge difference in the live thermal imaging view between the two aircraft.

The DJI Mavic 3 Enterprise Replaces The Phantom 4 RTK

Posted by on 9/27/2022 to Comparisons

Today, September 27, DJI released the two newest drones in their Enterprise lineup - the Mavic 3 Enterprise, and the Mavic 3 Thermal. As always with new releases, it leaves us with some questions. Where do the new drones fit in and what does this mean for the older drones?

The CZI LP12 Live Speaking Feature is Now Available

Posted by on 9/18/2022 to Product Info

The CZI LP12 is a 2 in 1 spotlight and megaphone attachment for the DJI M30T and M30. When it was first released it was lacking the ability to access the RC Plus controller's microphone. This meant that the only way...

DJI Matrice 300 RTK vs Matrice 30 Series | Everything you Need to Know

Posted by on 9/11/2022 to Comparisons

How to Use The DJI H20 Series Cameras

Posted by on 2/18/2021 to How To's

DJI’s H20 series cameras for the Matrice 300 RTK are the most versatile drone cameras available. Both the H20 and H20T have three sensors: a wide angle 12MP RGB sensor, a laser range finder and a 23x hybrid optical zoom sensor. The only difference between the two cameras is that the H20T has one additional sensor, a 640 x 512 resolution 30Hz thermal imaging sensor.

Terrestrial Imaging Partners With Quantum Systems

Posted by on 2/17/2021 to News

Terrestrial Imaging has partnered with Quantum Systems to offer their VTOL fixed wing platform, the Trinity F90+, and its wide selection of high precision, interchangeable payloads.

Introducing The DJI Mavic 2 Enterprise Advanced

Posted by on 12/15/2020 to Product Info

Just today, DJI introduced their latest drone, the Mavic 2 Enterprise Advanced. The rumors were spreading for quite some time about a new DJI Mavic, but today's announcement came with a lot of great surprises. Somehow DJI was able to pack even more features into the same Mavic 2 Enterprise air frame, and create an even more versatile platform ...

How to Activate DJI Enterprise Shield Renew

Posted by on 12/9/2020 to How To's

If your DJI Enterprise Shield protection plan is expiring soon, chances are you want to renew your coverage. The first step in renewing your Shield coverage is to track the expiration date. This sounds like a no brainier, but the date always creeps up faster than you think, and if you don't stay on top of it you might miss the window.

Why is my DJI Matrice 300 RTK Drifting?

Posted by on 12/3/2020 to Troubleshooting

My Matrice 210 V2 RTK Won't Pair With my D-RTK2 GNSS Mobile Station?

Posted by on 11/25/2020 to Troubleshooting

Autel Robotics Announces Made in America Status For EVO 2 Dual

Posted by on 9/4/2020 to Comparisons

The search for a quality American made drone may finally be over. For years now, the US government has been increasing restrictions on foreign made drones, specifically Chinese made drones, due to national security concerns. While the concerns are understandable, the American made alternatives have always been lacking in their capabilities and reliability, all while charging several times the price.

FLIR Vue TZ20 - The Latest Thermal Drone Payload

Posted by on 8/26/2020 to Product Info

Just yesterday, FLIR introduced the Vue TZ20, their newest thermal imaging drone payload for the DJI Matrice 300 and 200 V2 series. The TZ20 is the first fully integrated drone payload to include not one, but two high resolution 640 x 512 Boson thermal imaging sensors.

Introducing The DroMight Talon Drop System

Posted by on 8/10/2020 to Product Info

When designing the DroMight Talon, our goal was to remove all of the problems associated with other drop systems, and we did exactly that. The Talon is packed with features that make it incredibly easy to use and safer than any other system. To top it off, the Talon is compatible with both the DJI Matrice 210 V1 and V2 (RTK or non RTK versions).

DJI Matrice 300 RTK DroMight Strobe Lights Are Here!

Posted by Terrestrial Imaging on 6/21/2020 to Product Info

DroMight strobe lights were designed to meet the FAA’s requirements for anti collision lighting. The purpose of anti collision lighting is to increase the safety of your drone operations at night. To meet these requirements, DroMight uses powerful 3 watt strobe lights that can be seen from at least 3 statute miles on a clear night.

Welcome to our online store

Posted by on 6/4/2014 to Comparisons

Welcome to our online store! Our team is proud to announce that we're now open for business, and we look forward to serving you all in the future. If you have any questions about this store or the products found within, please don't hesitate to contact us any time. Our website has been carefully designed to provide you with an amazingly flexible online shopping experience, and its ease of navigation is something we think you'll grow to depend on and appreciate. Feel free to browse our entire product catalog, and let us know if you have any questions, comments or concerns about the items housed within. Our team is always ready and willing to assist our customers, and we are happy for your visit.